Technical Specifications of NSN
Body Material:
Steel, corrosion resisting
Body Style:
Standard round c
Shoulder Diameter:
Between 0.8118 inches and 0.8123 inches
Pilot Diameter:
Between 0.4995 inches and 0.5000 inches
Overall Length:
1.5110 inches
Flange Diameter:
Between 0.9360 inches and 0.9370 inches
Flange Thickness:
0.0630 inches
Undercut Diameter:
0.8400 inches
Undercut Width:
0.0620 inches
Shaft Diameter:
0.0940 inches single shaft
Shaft Length:
0.2300 inches single shaft
Fragility Factor:
Moderately rugged
Stator Input Voltage Rating In Volts:
11.8
Stator Input Current Rating:
21.0 milliamperes
Stator Input Electrical Power Rating:
50.0 milliwatts
Frequency In Hertz:
400.0
Zro Resistance In Ohms:
800.00
Zso Resistance In Ohms:
115.00
Zrs Resistance In Ohms:
890.00
Rotor Dc Resistance In Ohms:
560.00
Stator Dc Resistance In Ohms:
560.00
Phase Shift Angle In Deg:
9.000 input to output
Maximum Total Null Voltage Output In Millivolts Per Volt:
0.03
Electrical Error Angular Range In Minutes:
-12.0/+12.0
Actuator Friction Torque At Minus 55 Deg Celsius:
9.0 centimeter-grams
Actuator Friction Torque At Plus 25 Deg Celsius:
3.0 centimeter-grams
Alignment Hole Quantity:
3
Pilot Length:
0.0380 inches
Shoulder Length:
0.0620 inches
Gear Outside Diameter:
Between 1.7073 inches and 1.7083 inches
Gear Thickness:
0.1250 inches
Mounting Surface To Terminal End Distance:
1.2810 inches
Shaft Hole Diameter:
0.0600 inches single shaft
Plus J Zro Reactance In Ohms:
2900.00
Plus J Zso Reactance In Ohms:
470.00
Shaft Tapered End Minor Diameter:
0.0775 inches single shaft
Plus J Zrs Reactance In Ohms:
350.00
Shaft Type:
Round, tapered, hollowed single shaft
Alignment Hole Depth:
0.0500 inches
Transformation Ratio:
2.302 rotor to stator
Shaft Taper Angle In Deg:
3.0 single shaft
Alignment Hole Bolt Circle Diameter:
0.6780 inches
Shaft Taper Length:
0.1250 inches single shaft
Terminal Type And Quantity:
6 wire lead
Item Name:
Synchro,control Transformer
Other Related Parts
Part Number
Cage
RNCC
RNVC
RNAAC
Status
MSDS
SADC
